Manufacturer: John McCluen Company Part # | Float Size | Buoyancy | 96114 | 24" x 48" x 12" | 380 lbs. | 24180 | 24" x 48" x 18" | 590 lbs. | 97000 | 36" x 48" x 12" | 590 lbs. | 89122 | 36" x 48" x 18" | 870 lbs. | 91516 | 36" x 48" x 25" | 1,280 lbs. | 44180 | 48" x 48" x 18" | 1,260 lbs. |
| width x length x depth |
|
Width and Length are from the mounting flange, depth is from top of the flange to the bottom of the float. Floats taper slightly from 1” inside the flange to the bottom. Mounting flange is 1" wide and 1/4” thick Attachment with self-tapping screw, lag bolt, or nut and bolt to wood, aluminum or steel structures Construction: Vacuum formed, high molecular weight high-density virgin polyethylene (HDPE) plastic. Minimal tub wall thickness .125" (1/8”) with molded-in stiffeners for reinforcement. A special formulated HDPE weld tape forms a durable 1” watertight seal and permanently bonds the top to the tub. Two air release vents are located under the flange on opposite corners to discharge built-up air. Foam: 1 lb. per cubic foot solid expanded polystyrene (EPS) foam block Buoyancy Capacities: 380-1,280 lbs net freshwater buoyancy Warranty: 10-year, non-prorated Exceeds Code of Federal Regulations CFR Title 36, Section 327, Subpart 30.   1. Main Body of Float. 2. Attaches to wood, aluminum or steel structures. 3. 1/4” thick mounting flange. 4. Self-drilling/self-tapping screw, lag bolt, etc. Ideal location for attachment is 1/2” from edge of flange. Drilling beyond 3/4” may compromise the watertight integrity of the float and void your warranty. 5. Note: Flange is for attachment only. Weight of structure must be supported by stringers across the body of the float. John McCluen Company 401 Joff Drive Cookeville, TN 38501 800-848-9122 |
